Product Specifications:
- Discharge Bore: 50 mm (2")
- Motor Output: 0.4 kW (½ HP)
- Voltage / Amperage: 110V - 115V / 5.4A
- Phase: Single-Phase
- Max Head: 12.2 m (40 ft)
- Max Flow: 205 L/min (54 GPM)
- Starting Method: Capacitor Run
- Solids Passage: 7 mm (0.28")
- Dimensions: 255 mm x 328 mm (10-1/16" x 12-15/16")
- Continuous Running Water Level: 90 mm (3.5")
- Pump Weight: 13.6 kg (30 lbs)
- Impeller Type: Semi-Vortex (Urethane Rubber)
- Cable Length: 6 m (20 ft)
Product Features:
- Built-in Shaft Agitator: Stirs settled solids into suspension and prevents airlock for smoother pumping
- Anti-wicking Cable Entry: Individually seals each conductor to block water from reaching the motor via capillary action
- Internal Thermal Protector: Automatically guards against motor burnout caused by overheating or dry-running
- Dual Inside Mechanical Seal: Features Silicon Carbide (SiC) faces within an oil chamber for maximum wear resistance
- Patented Oil Lifter: Maintains seal lubrication and cooling even if oil levels drop, extending pump life
- Urethane Rubber Impeller: Provides 3x the abrasion resistance of standard cast iron impellers
- Multi-Directional Discharge: Allows the discharge connection to be positioned vertically or inclined to prevent hose kinking
[MANDARIN]
- 内置搅拌器: 位于轴端的搅拌叶轮可防止气锁，并将泥沙搅拌成悬浮状以便顺利排出
- 防吸潮电缆出线口: 逐芯密封设计，即使电缆护套破损也能防止水分通过毛细作用进入电机
- 内置电机保护器: 在电机过热或干转时自动切断电源，防止电机损坏
- 双端面机械密封: 密封置于油室内，采用碳化硅材质，提供极佳的耐磨损保护
- 专利油提升器: 即使油位降低，也能确保持续润滑和冷却机械密封，延长泵的使用寿命
- 聚氨酯橡胶叶轮: 提供比标准铸铁叶轮高出三倍的耐磨性能
- 多向排水出口: 排水口方向可调，有效防止排水软管折弯或受损
Inquiry - 2" TSURUMI HS2.4S-53 MANUAL SUBMERSIBLE PORTABLE DRAINAGE PUMP (SINGLE PHASE)
View more
TSURUMI
