Product Specifications:
- Discharge Bore: 50 mm (2")
- Motor Output: 0.4 kW
- Voltage / Frequency: 110V / 60Hz
- Phase: Single-Phase
- Max Head: 12 m
- Max Flow: 205 L/min (12.3 m³/h)
- Rated Flow: 120 L/min (0.12 m³/min)
- Starting Method: Capacitor Run
- Dry Weight: 11.3 kg
- Impeller Type: Semi-Vortex (Urethane Rubber)
- Cable Length: 10 m (32 ft)
Product Features:
- Low Water Level Drainage: Designed to pump water down to 1 mm (0.04") from the ground surface
- Non-Return Valve: Prevents backflow of discharged water when the pump stops operating
- Built-in Shaft Agitator: Prevents airlock and stirs debris into suspension for efficient discharge
- Anti-wicking Cable Entry: Seals each conductor individually to prevent water from entering the motor through the cable
- Internal Thermal Protector: Automatically shuts down the motor in case of overheating or dry-running to prevent burnout
- Dual Inside Mechanical Seal: Silicon carbide faces are submerged in an oil chamber for superior wear resistance
- Patented Oil Lifter: Ensures mechanical seals remain lubricated and cooled even if oil levels drop
[MANDARIN]
- 低水位排水设计: 可将地面积水排放至低达 1 毫米 (1 mm) 深度
- 单向止回阀: 防止水泵停止运行时排出管内的水倒流
- 内置搅拌器: 位于轴端的搅拌叶轮可防止气锁，并将泥沙搅拌成悬浮状以便顺利排出
- 防吸潮电缆出线口: 逐芯密封设计，即使电缆护套破损也能防止水分通过毛细作用进入电机
- 内置电机保护器: 在电机过热或干转时自动切断电源，防止电机损坏
- 双端面机械密封: 密封置于油室内，采用碳化硅材质，提供极佳的耐磨损保护
- 专利油提升器: 即使油位降低，也能确保持续润滑和冷却机械密封，延长泵的使用寿命
Inquiry - 2" TSURUMI HSR2.4S MANUAL ELECTRIC SUBMERSIBLE PUMP (SINGLE PHASE)
View more
TSURUMI
